How to set the Lithium battery via the eBox-WiFi or eBox-BLE? : EPEVER

How to set the Lithium battery via the eBox-WiFi or eBox-BLE? Print

Created by: EPEVER Support

Modified on: Tue, 12 Nov, 2019 at 9:38 PM

1. Connect to your eBox device (please check the below article if you have trouble to connect to your eBox device)

2. Go to controller settings

3. Click on "Read"

4. Get into the "Battery Settings"

5. Click on "Read"

6. Change the Rated Voltage Level by clicking on this area

7. Select your system voltage

8. Change the battery type by clicking on this area

9. Select "User"

10. Click on "Send"

11. After the "Operation Successful", click on "Read" again to doublecheck the settings that have been set successfully.

12. Go to Advanced1 by clicking on this area

13. Read your parameters first before changing any of them.

14. Now you can adjust your parameters, after done click on send

15. Click on "Read" again to doublecheck the parameters that have been set successfully

EPEVER is the author of this solution article.

Did you find it helpful? Yes No

How to set the Lithium battery via the eBox-WiFi or eBox-BLE? Print